Home > News > Content
Matters Needing Attention When Using I-beam Cold Bending Machine
Nov 25, 2017

The proper use of equipment, implement equipment maintenance, comply with safety operation procedures, reduce equipment failure, prolong the service life of the equipment, necessary conditions to ensure safety in production, so the equipment operators and maintenance personnel must understand the equipment structure, performance and maintenance methods and procedures.

1. never start the motor before the fuel tank is injected. Before use, check whether the tank is full of oil, such as inadequate should be filled, in order to prevent oil pump suction. The hydraulic oil used in the equipment must be filtered strictly before it can be injected into the tank. The tank must be cleaned before loading, and it is generally recommended to use No. 46 or 68 anti-wear hydraulic oil.

2. the equipment is oil as medium, must do the oil and the equipment cleaning and maintenance work, so as to avoid the blockage or leakage effect. The oil must be kept clean, the first time should not be more than two months, when changing, should be cleaning the filter net and fuel tank, pay attention to the filter net can be placed in kerosene flushing, can not use hard brush scrub, such as oil is not deteriorated, after filtration can still use.

3. always check the equipment, whether there is a blockage in the lubrication phenomenon.

4. after the end of each class, please use the inching recovery cylinder.

5. if the equipment is not used for a long time, antirust oil should be coated on the sliding surface.


Products List